Deutsch 6 Pin J1708 Female to J1939 9 Pin Male and J1708 Male Splitter Y Cable
Specification
| J1708 female connector | equivalent of Deutsch HD16-6-12S-B010 |
| J1708 male connector | equivalent of Deutsch HD10-6-12P |
| J1939 male connector | equivalent of Deutsch HD10-9-1939P-P080 |
| Type of J1939 male connector | Type 2 |
| Wire | 20AWG, pure copper |
| Material of J1939 connector | PA66 + glass fiber |
| Material of J1708 connectors | PA66 + glass fiber |
| Pin assignment or pin out | customized |
| Cable length | customized |
| Pins or terminals | copper, nickel-plated or gold-plated |
| Contact Resistance | 3 ohm max. |
| Insulation Resistance | 5M ohm min. |
| Working Temperature | −25℃ ~ +85℃ |
| Testing | 100% open, short and mis-wire testing |
| Testing Voltage | DC300V 5M ohm/10ms |
| Warranty | 1 year |
The end of Deutsch 6 Pin female and male connectors can be overmolded or not, according to your needs.
Overmolded
Not overmolded
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like this (4 pins to be connected):
| J1939 male | Signal | J1708 female | J1708 male |
| A | Ground | E | E |
| B | Battery | C | C |
| F | J1708, CAN-H | A | A |
| G | J1708, CAN-L | B | B |
The pin assignment or pin out can also be customized according to your needs.
Application
The common application is to connect telematics or fleet management devices to older 6 pin round diagnostic connector in medium and heavy duty vehicles model years from the early-to-mid-2000s.
This Deutsch 6 Pin J1708 Y Cable allows port relocation or connection of multiple devices. This Y cable is for older medium and heavy duty vehicles model years from the early-to-mid-2000s that have the J1708 6 pin diagnostic port adjacent to the clutch pedal or in some other inconvenient location. It is also for vehicles that require multiple devices be connected to the J1708 6 pin diagnostic port. This Y cable splits the J1708 diagnostic port, allowing one J1708 port at the original location and another J1939 port connected to an ELD or another device which has a J1939 port.
This cable will also allow J1939 diagnostic devices or scanners (with the appropriate software) to connect to commercial vehicles with the J708 6 Pin port.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2 or J1708 cables, adapters or connectors in our website, feel free to let us know what J1939, OBD2 or J1708 cables, adapters or connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)
Product Tags:
|
|
Deutsch 6 Pin J1708 Female to J1939 9 Pin Male and J1708 Male Splitter Y Cable Images
|
